Precise Fabrication Techniques

March 8, 2021by admin

Precise Fabrication Techniques


Do you want to find out all the latest and precise fabrication techniques used today? This article will go over just that! We cannot deny that metal has become an integral part of our everyday lives. Everything is constructed out of a stabilized metal, from our utensils to our appliances to our desks, chairs, etc. 


Metal fabrication is the procedure that converts raw materials into metal-based products ready to be sold in the market. Even in the automobile industry, the panels used to build the car’s frame is also manufactured by the metal fabrication industry. Actually, the processes are diverse and complex, and there is no single technique used in the industry to manufacture all products.

 Let’s take a look at some of the top integral methods used by the metal industry. 

  • Cutting

Cutting has to be the essential metal fabrication technique used almost everywhere. Steel is usually taken as the raw material, which is cut with machinery to produce an impressive structure. It is split into small segments such as halves, thirds, etc. 

Previously, saws were used to cut the raw materials. Now that the industries have advanced, powerful drills, water jets, laser cutters, etc., are used to cut steel and process it into shapes. 

  • Machining

Machining is another common fabrication technique that removes the excess material till a proper shape is made.

 This technique has further other subtypes:

  • Drilling 
  • Turning 
  • Milling 
  • Punching

Punching is the fabrication technique that forms holes on a segment of any metal. A die is placed above the metal, and holes are punched using a machine drill. The drill should neatly cut through the metal in equal segments to achieve the required hole size. These holes are either used to fasten something while holes are made to achieve a product in demand. 

  • Stamping

Stamping at times is also known as pressing. It is quite similar to punching holes; however, the metal piece is not cut in stamping. The first coins ever made back in the seventeenth century were made by stamping. 

  • Shearing

Shearing is another common fabrication technique where the worksheet is cut in length. There are scenarios where the sheet can be horizontally cut and mainly the cutting tool cust and the metal’s vertical height. 

It is also used to cut down the edges of raw material to smoothen it. 

  • Folding

It is folding, even though it is commonly used, but it is believed to be a complicated fabrication process. The raw material is stressed enough so that it transforms into an angled shape. That is done to achieve a blunt surface on the raw material. This technique is used by industries that can afford high-end and complex equipment for the procedure. Small-scale sectors do not use this technique. 

  • Casting

If we talk about the fabrication methods that have been used for centuries, then casting has to be one of them. In casting, the metal’s molten form is placed in a mold and left to cool down until it forms the mold’s shape. That is known to be one of the most diverse fabrication techniques used to make several shapes.  

  • Sandblasting

Sandblasting is a famous abrasive fabrication technique. A special kind of equipment is used to force the abrasives out in the form of a stream.  

The process is completed by shooting the raw material through a nozzle with extreme mechanical force on a compressed surface using air pressure. 

Contact us today for all your metal fabrication products.



We are based in the industrial heart of Tampa, Florida.
+ 1 813-231-3167


2902 E Sligh Ave

Tampa, FL 33610

get in touch

Follow Our Activity

Connect with us on social media to see more of our work and facilities!